材料科学
压电
电致伸缩
超声
无定形固体
铁电性
复合材料
聚合物
压电系数
压电响应力显微镜
化学工程
结晶学
光电子学
工程类
电介质
化学
作者
Guanchun Rui,Elshad Allahyarov,Honghu Zhang,Ruipeng Li,Shihai Zhang,Philip L. Taylor,Lei J. Zhu
出处
期刊:Nano Energy
[Elsevier BV]
日期:2023-06-05
卷期号:113: 108590-108590
被引量:25
标识
DOI:10.1016/j.nanoen.2023.108590
摘要
Among all ferroelectric polymers, poly(vinylidene fluoride) (PVDF)-based polymers exhibit the best piezoelectric properties and thus are promising for sensors, actuators, and energy harvesters in flexible/wearable electronics and soft robotics. Despite decades of research effort, the structure-property relationship is still unclear for ferroelectric polymers, and their piezoelectric performance is often limited to ∼30 pC/N. In this study, we report the effects of chemical defects [i.e., the head-to-head and tail-to-tail (HHTT) sequence] and high-power ultrasonication on the piezoelectric performance of PVDF. Two PVDF homopolymers with different HHTT contents were studied. The PVDF with a lower HHTT content (4.3 %) exhibited a higher melting temperature (Tm, denoted as HMT), whereas that with a higher HHTT content (5.9 %) exhibited a lower Tm (denoted as LMT). In addition to the primary crystals (PCs) and the isotropic amorphous fraction, wide-angle X-ray diffraction also suggested the presence of the oriented amorphous fraction (OAF) and secondary crystals (SCs), which are important in enhancing the piezoelectricity for PVDF. Intriguingly, the LMT PVDF exhibited higher piezoelectric performance than the HMT PVDF, because it had a higher OAF/SC content. In addition, high-power ultrasonication was shown to effectively break relaxor-like SCs off from the PCs, further enhancing the piezoelectric performance. That is, the inverse piezoelectric coefficient d31 reached as high as 76.2 pm/V at 65 °C for the ultrasonicated LMT PVDF. The insight from this study will enable us to design better piezoelectric PVDF polymers for practical electromechanical applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI