PFAS–CTAB Complexation and Its Role on the Removal of PFAS from a Lab-Prepared Water and a Reverse Osmosis Reject Water Using a Plasma Reactor

Electrical discharge plasma reactors with argon bubbling can effectively treat long-chain perfluoroalkyl acids (PFAAs) in contaminated water, and the addition of a cationic surfactant cetrimonium bromide (CTAB) is known to enhance the removal of short-chain PFAAs. However, the roles of PFAA chain length, functional group, and water matrix properties on PFAA-CTAB complexation are largely unknown. This work investigated the bulk liquid removal of different PFAAs by CTAB in the absence of plasma. Stepwise addition of CTAB was subsequently used to efficiently treat PFAAs in a lab-prepared water and a reverse osmosis (RO) reject water using an enhanced contact plasma reactor. The results show that CTAB inhibited the bulk liquid removal of long-chain PFAAs in the absence of plasma likely due to the formation of hydrophilic CTAB-PFAA mixed micelles and competition for interfacial access between long-chain PFAAs and CTAB. On the contrary, CTAB enhanced the removal of short- and ultrashort-chain PFAAs by forming hydrophobic complexes. After 6 h of treatment in the plasma reactor with CTAB, PFAAs were 86 to >99% removed from the lab-prepared water and 29 to >99% removed from the RO reject water. This study provides important insights for overcoming mass transfer limitations for PFAA treatment technologies.