薄膜晶体管
材料科学
氧气
体积流量
阈值电压
流量(数学)
光电子学
溅射
氧化物
晶体管
水流
析氧
化学工程
电压
偏压
氧气输送
分析化学(期刊)
化学物理
极限氧浓度
电流(流体)
作者
Tingting Jin,Yujia Qian,Xishuang Gu,Junyan Ren,Hongfei Wu,Yuting Xiong,Lingyan Liang,Cao Hongtao
标识
DOI:10.1021/acsaelm.5c01691
摘要
The effects of water on oxide thin-film transistors (TFTs) are significant, yet complex, and remain inconclusive. In this work, the effects of water bath treatment on the performance of InGaZnO (IGZO) TFTs fabricated under different sputtering oxygen flow rates (0–7 sccm) were systematically investigated. The results reveal that the oxygen flow shows a large influence on the electrical properties, bias stress stability, and water-bathing stability. Especially, low and high flow rates correspond to large negative and positive bias-stress (NBS and PBS) threshold-voltage shifts (ΔV th ), respectively. Oxygen vacancies (V O ) that prefer gathering at the IGZO surface layers are the main reason for the large NBS ΔV th, while water bathing can gently etch the V O -rich layer, hence improving the NBS stability. As a result, the TFTs fabricated under a moderate oxygen flow rate (3 sccm) show a large field-effect mobility (30.1 cm 2 /V s), a threshold voltage close to 0 V (0.104 V), and small NBS/PBS ΔV th (−0.43 V/0.43 V) even after a 24 h water bath.
科研通智能强力驱动
Strongly Powered by AbleSci AI