Ultra flexible silica aerogel with excellent mechanical properties for durable oil-water separation

Flexible Silica aerogel has a broad application prospect in the field of oil-water separation due to its low density and high porosity. However, its poor mechanical properties limit its application and it is a challenge to improve its mechanical properties while maintaining its excellent oil absorption capacity. In this work, we add silica sol to the silica source system formed by vinyltrimethoxysilane (VTMS) and vinylmethyl dimethoxysilane (VMDMS) to prepare silica sol-reinforced flexible silica aerogels by ambient pressure drying. The introduction of silica sol provides more -OH groups that can be used as condensation sites. The hydrolysis products of VTMS and VMDMS undergo dehydration condensation reaction with these exposed -OH groups and co-polymerize, resulting in a more robust three-dimensional porous structure. Silica sol- reinforced vinyl flexible silica aerogel is prepared with excellent mechanical properties. Its maximum strain can reach 80% in 10 compression-decompression cycles without destroying its structure. Its hydrophobic angle was 145.7 °. Most particularly, compared to conventional flexible aerogel,when the silica sol-reinforced vinyl flexible silica aerogel is used in oil-water separation applications, it does not need to be dried after absorbing oil but only mechanically squeezed to expel the absorbed organic solvent. It can be reused hundreds of times, which greatly improves the efficiency of oil-water separation.