超级电容器
材料科学
碳纤维
电容
电化学
电极
化学工程
多孔性
比表面积
储能
法拉第效率
煤
残余物
冶金
纳米技术
熔渣(焊接)
电解质
作者
Xiaotian Wang,Jianan Wen,Bingxin Cai,Runguo Li,Zhangcai Zhou,Guoxiang Xin,Jinxiao Bao,Yao Wang,Jinling Song
出处
期刊:Ionics
[Springer Science+Business Media]
日期:2026-11-11
标识
DOI:10.1007/s11581-026-07632-7
摘要
Supercapacitors are promising electrochemical energy storage devices because of their high power density, fast charge–discharge rate, and long cycle life. The development of low-cost and high-performance carbon electrode materials is crucial for improving their practical application. Herein, residual carbon (RC) from coal gasification fine slags (CGFSs) was used as a carbon precursor to prepare low-cost carbon electrode materials (RCHK-X) through HNO₃ pre-activation followed by KOH activation. HNO₃ treatment introduced abundant oxygen-containing functional groups, while subsequent KOH activation further enhanced the surface functionality and specific surface area, removed part of the nitrogen-containing species introduced during acid treatment, and generated more defects and electrochemically active sites. The optimized RCHK-3 sample exhibited a specific surface area of 775 m² g⁻¹ and a low contact angle of 35.0°, suggesting favorable ion accessibility and surface wettability. When used as a supercapacitor electrode, RCHK-3 delivered a specific capacitance of 155 F g⁻¹ at 0.5 A g⁻¹ and maintained 99.03% of its capacitance after 10,000 cycles. This work demonstrates an effective strategy for converting CGFS-derived residual carbon into value-added electrode materials and provides guidance for designing porous carbon materials for high-performance supercapacitors.
科研通智能强力驱动
Strongly Powered by AbleSci AI