材料科学
钻石
异质结
光电子学
亚稳态
半导体
外延
带隙
无线电频率
金刚石材料性能
宽禁带半导体
电子迁移率
格子(音乐)
金刚石立方
纳米技术
电子能带结构
晶格常数
超晶格
应变工程
表面光洁度
化合物半导体
异质结双极晶体管
凝聚态物理
工程物理
波段图
化学气相沉积
表面粗糙度
作者
Cui Yu,Zemin Zhang,Qingbin Liu,Pengyu Li,Zezhao He,Yihe Cheng,Cheng Xu,Chuangjie Zhou,Hao Yu,Mengyu Ma,Yawei Wang,Jialin Shao,Lu Yang,Kun Tao,Zhihong Feng
摘要
ABSTRACT While diamond stands as the preeminent paradigm for next‐generation high‐power and radio‐frequency electronics, its practical application has been bottlenecked by the lack of a stable and high‐quality ultra‐wide bandgap gate dielectric/barrier layer. Here, we report a transformative breakthrough in achieving the single‐domain heteroepitaxy of cubic AlN on (001) diamond via MOCVD. By strategically exploiting a nitrogen‐for‐hydrogen substitution mechanism, we successfully circumvent diamond's chemical inertness and the thermodynamic metastability of the cubic phase. Microscopic analysis reveals that the formidable 22.8% lattice mismatch is accommodated by a periodic 6:7 domain‐matching epitaxy model, relieving residual strain to 2.45% and enabling a record‐low RMS roughness of 0.74 nm. Most significantly, this structurally seamless, polarization‐free Type‐II interface induces a high‐performance two‐dimensional hole gas with a record room‐temperature hole mobility of 314 cm 2 V −1 s −1 at a sheet density of 3.2 × 10 12 cm −2 . Utilizing this platform, normally‐off diamond FET was demonstrated, providing a definitive roadmap for high‐symmetry, high‐mobility diamond power and RF electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI