校准
方位(导航)
断层(地质)
可靠性(半导体)
计算机科学
代表(政治)
特征(语言学)
一般化
集合(抽象数据类型)
噪音(视频)
数据挖掘
采样(信号处理)
人工智能
模式识别(心理学)
算法
共形映射
故障模拟器
可靠性工程
机器学习
基础(线性代数)
故障检测与隔离
人工神经网络
假警报
测距
特征提取
振动
工程类
背景噪声
作者
Aswin Karkadakattil,Arjun Kalath
出处
期刊:
日期:2026-06-30
卷期号:4 (2): 173-212
摘要
Bearing fault diagnosis remains challenging when models trained on one set of machines are applied to equipment with different bearing geometries, operating speeds, and vibration characteristics.Conventional evaluation protocols often overestimate cross-machine performance, while prediction uncertainty becomes difficult to calibrate under machine-level distribution shift.This study investigates whether geometry-anchored fault features and machinelevel conformal calibration can jointly improve diagnostic accuracy and prediction-set reliability on previously unseen machines.A structured review was conducted to identify methodological gaps, followed by controlled simulations involving eight machines with different bearing geometries, shaft speeds, sampling rates, structural resonances, and noise conditions.Three feature representations and four calibration schemes were evaluated using a leave-one-machine-out protocol.The geometry-anchored representation achieved a mean classification accuracy of 0.908 ± 0.014, compared with 0.585 ± 0.016 and 0.575 ± 0.023 for frequency-domain and order-domain features, respectively.Random window splitting overestimated the accuracy of these baselines by 0.25 and 0.29.At a nominal coverage level of 90%, machine-level conformal calibration achieved mean coverage between 0.903 and 0.931, compared with 0.642-0.879for conventional split calibration.With geometry-anchored features, the calibrated prediction sets contained 0.99 classes on average, whereas the other representations required 2.77-2.96classes.Conservative calibration increased worst-machine coverage from 0.751 to 0.866, although individualmachine coverage remained variable.The results indicate that physically indexed fault features and machine-level calibration address complementary aspects of cross-machine diagnosis: the former improves fault discrimination, while the latter supports more reliable marginal coverage under machine shift.The study establishes a controlled evaluation framework for examining diagnostic generalization and uncertainty calibration at the machine level, providing a methodological basis for subsequent validation using experimental and industrial bearing data.
科研通智能强力驱动
Strongly Powered by AbleSci AI