电池(电)
伏特
阴极
离子
钠
钾离子电池
化学
钠离子电池
无机化学
放射化学
材料科学
阳极
电气工程
磷酸钒锂电池
电极
电压
物理
有机化学
物理化学
法拉第效率
工程类
功率(物理)
量子力学
作者
Pengfei Wang,Hanshen Xin,Tong‐Tong Zuo,Qinghao Li,Xinan Yang,Ya‐Xia Yin,Xike Gao,Xiqian Yu,Yu‐Guo Guo
标识
DOI:10.1002/ange.201804130
摘要
Abstract Layered O3‐type sodium oxides (NaMO2, M=transition metal) commonly exhibit an O3–P3 phase transition, which occurs at a low redox voltage of about 3 V (vs. Na+/Na) during sodium extraction and insertion, with the result that almost 50 % of their total capacity lies at this low voltage region, and they possess insufficient energy density as cathode materials for sodium‐ion batteries (NIBs). Therefore, development of high‐voltage O3‐type cathodes remains challenging because it is difficult to raise the phase‐transition voltage by reasonable structure modulation. A new example of O3‐type sodium insertion materials is presented for use in NIBs. The designed O3‐type Na0.7Ni0.35Sn0.65O2 material displays a highest redox potential of 3.7 V (vs. Na+/Na) among the reported O3‐type materials based on the Ni2+/Ni3+ couple, by virtue of its increased Ni−O bond ionicity through reduced orbital overlap between transition metals and oxygen within the MO2 slabs. This study provides an orbital‐level understanding of the operating potentials of the nominal redox couples for O3‐NaMO2 cathodes. The strategy described could be used to tailor electrodes for improved performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI