膜
纳滤
材料科学
水溶液
化学工程
相位反转
聚电解质
聚合物
稀释
制作
高分子化学
化学
复合材料
有机化学
替代医学
病理
物理
热力学
生物化学
医学
工程类
作者
Stephan Emonds,Johannes Kamp,Julian Borowec,Hannah Roth,Matthias Weßling
标识
DOI:10.1002/adem.202001401
摘要
Tubular membrane geometries are key elements of many industrial filtration applications and artificial organs. Established processes to fabricate polymeric membranes require the use of organic solvents, which are prone to be phased out due to stricter regulations. In the quest of developing solvent‐free alternative fabrication processes, polyelectrolyte complex (PEC) membranes are recently discovered, offering a promising alternative. While flat sheet PEC membranes are successfully fabricated, tubular or hollow fiber geometries remain a material engineering challenge. For the first time, the organic solvent‐free fabrication of PEC tubular membranes in a dry‐jet wet spinning process is demonstrated. The aqueous polymer solution comprising the polyanion—poly(sodium‐4‐styrenesulfonate) (PSS), the polycation—poly(diallyldimethylammonium‐chloride) (PDADMAC), and KBr is extruded with the water‐based bore fluid through a single‐orifice spinneret, passing an air‐gap before immersed into an aqueous coagulation bath. The phase inversion kinetics are influenced to form a defect‐free lumen separation layer through the addition of glycerol to the bore fluid. The resulting tubular membranes show reproducible nanofiltration membrane properties. They have a molecular cut‐off of 320 Da, are positively charged and retain salts with a characteristic salt retention hierarchy. This promising material engineering strategy motivates to continue the quest for smaller tubular dimensions toward hollow fibers.
科研通智能强力驱动
Strongly Powered by AbleSci AI