Electrodeposition and Characterization of Manganese Coatings

Manganese coatings of high quality are electrodeposited on steel substrates from simple sulfate solutions with addition of ammonium sulfate. Potentiodynamic scans and galvanostatic experiments are used to study manganese electrodeposition in a wide range of pH and current density. The effect of these variables on the microstructure, crystallography, mechanical, and corrosion-resistance properties of manganese deposits are investigated. It is found that ammonium sulfate enhances the reduction reaction of the manganese ion and provides a buffering effect. Two types of manganese deposits can be obtained depending on current density: crystalline films (type I, body-centered tetragonal γ-Mn) at low current density and amorphous films (type II) at high current density. Bright manganese films with (002) preferential orientation are electrodeposited at low pH. Type I structures show recrystallization at room temperature with phase transformation; the rate of phase transformation from γ-Mn to α-Mn (body-centered cubic) follows a Johnson-Mehl-Avrami kinetics. Crystalline films obtained at relatively high current density and low pH tend to have higher phase transformation rates. Amorphous films show good corrosion resistance both in acidic sodium sulfate/borate and sodium chloride electrolytes. © 2002 The Electrochemical Society. All rights reserved.