传递率(结构动力学)
隔离器
隔振
刚度
谐波平衡
非线性系统
振动
谐波
控制理论(社会学)
结构工程
力动力学
工程类
功率(物理)
机械
声学
物理
计算机科学
机械工程
电气工程
人工智能
量子力学
控制(管理)
作者
Ze-Qi Lu,Dong Shao,Hu Ding,Li‐Qun Chen
摘要
The manuscript concerns the power flow characterization in a two‐stage nonlinear vibration isolator comprising three springs, which are configured so that each stage of the system has a high‐static‐low‐dynamic stiffness. To demonstrate the distinction of evaluation for vibration isolation using power flow, force transmissibility is used for comparison. The dynamic behavior of the isolator subject to harmonic excitation, however, is of interest here. The harmonic balance method (HBM) could be used to analyze the frequency response curve (FRC) of the strong nonlinear vibration system. A suggested stability analysis to distinguish the stable and the unstable HBM solutions is described. Increasing both upper and lower nonlinear stiffness could bend the first resonant peak to the left. The isolation range in the power and the force transmissibility plot could be extended to the lower frequencies when the nonlinear stiffness is increased, but the rate of roll‐off for the power transmissibility is twice the rate for the force transmissibility at each horizontal stiffness setting. An explanation for this phenomenon is given in the paper.
科研通智能强力驱动
Strongly Powered by AbleSci AI