材料科学
去壳
涂层
复合材料
吸附性
吸水率
抗压强度
硅烷
表面粗糙度
多孔性
接触角
超疏水涂料
渗透(战争)
植物
生物
运筹学
工程类
作者
H Husni,Mahsa Nazari,Hooi Min Yee,Rohamezan Rohim,Amer Yusuff,Mohd Azahar Mohd Ariff,Nor Naimah Rosyadah Ahmad,C.P. Leo,Mohd Usman Mohd Junaidi
标识
DOI:10.1016/j.conbuildmat.2017.03.078
摘要
The silica particles in rice husk ash are useful to create the roughness required by the superhydrophobic coating on concrete. The superhydrophobic coating was prepared using rice husk ash dispersed in the ethanolic solution containing fluoroalkyl silane, 1H,1H,2H,2H-perfluorodecyl triethoxy silane (2 vol.%). The ash solution was sprayed on a layer of commercial adhesive coated on the concrete. The water contact angle of 152.3 ± 0.5° on the coated concrete was observed. The cumulative water uptake was reduced as much as 40.38% while the water sorptivity was reduced up to 44.44%. The penetration of water into the coated concrete under the water pressure of 500 kPa was successfully reduced after 72 h, but not fully prevented. The ash coating did not affect the surface hardness or the compressive strength significantly, but the ash coating resulted in a higher ultrasonic velocity due to the reduction of surface porosity.
科研通智能强力驱动
Strongly Powered by AbleSci AI