泥浆
过程(计算)
钥匙(锁)
工艺工程
原材料
钻石
制造工程
陶瓷
烧结
材料科学
脱脂
工程类
冶金
3D打印
制造工艺
机械工程
制作
快速成型
作者
Yani WANG,Shaohe ZHANG,Qian ZHANG,Xiangwang Kong,Tao He,Dongpeng ZHAO,Hua GAO
标识
DOI:10.13394/j.cnki.jgszz.2022.0082
摘要
The direct ink writing (DIW) technology of slurry is a 3D printing technology based on slurry extrusion. It has the advantages of low energy consumption, low cost, fast printing speed and no structural design restrictions. On the basis of summarizing the advantages of the application of DIW technology to ceramic-based diamond tools, key steps in the application process, such as the raw material selection, the slurry preparation, the printing suitability, the degreasing and the sintering process, are discussed and the powder agglomeration problem that needs to be given attention to in the slurry preparation process is pointed out. At the same time, some research examples of DIW manufacturing process are analyzed. Finally, it points out the key problems that should be solved in DIW manufacturing ceramic-based diamond tools.
科研通智能强力驱动
Strongly Powered by AbleSci AI