材料科学
腐蚀
电镀(地质)
十二烷基苯磺酸钠
冶金
多孔性
电化学
十二烷基硫酸钠
吸附
镍
肺表面活性物质
合金
化学镀镍
化学工程
镀金(软件工程)
硫酸钠
钠
碳钢
微观结构
点蚀
镀铜
扫描电子显微镜
电化学噪声
镁合金
复合材料
沉积(地质)
镁
硅酸钠
作者
Shilong Zhang,Qizi Wu,Chen Ding,Shuaiwei Wei,Shaojie Wang,Haining Feng,Guixiang Wang,Fuqiu Ma
标识
DOI:10.1680/jsuin.25.00053
摘要
Electroless nickel (EN) plating endows Mg alloys with integrated corrosion protection and electrical conductivity, making it highly promising for aerospace applications. Nevertheless, micro-galvanic corrosion induced by pinhole defects in EN platings severely restricts their practical deployment. Herein, five surfactants (sodium laureth sulfate [AES], sodium methyl ester sulfonate, sodium dodecyl sulfonate, sodium dodecyl sulfate, sodium dodecylbenzenesulfonate [SDBS]) were introduced into the EN plating bath. The plating microstructure, composition, and corrosion resistance were systematically evaluated via scanning electron microscope, energy-dispersive X-ray spectrometer, porosity tests, electrochemical measurements, and molecular dynamics (MD) simulations. Results indicated that surfactant addition remarkably reduced plating porosity, with SDBS-modified platings achieving zero porosity in 5 wt% NaCl solution. Electrochemical tests confirmed that SDBS-based EN platings exhibited the highest charge transfer resistance (8.201 × 103 Ω·cm2) and corrosion inhibition efficiency (83.3%), outperforming other surfactants. MD simulations revealed that all surfactants spontaneously adsorbed on the Ni (111) surface, while excessive adsorption strength (e.g. AES) hindered Ni2+ deposition and compromised plating quality. This work provides a facile and effective strategy to tailor EN plating performance via surfactant modification, facilitating the reliable application of Mg alloys in aerospace environments.
科研通智能强力驱动
Strongly Powered by AbleSci AI