作者
Yuexi Zhuang,Miriam Seiti,Karen Libberecht,Tim Vangansewinkel,Ivo Lambrichts,Eleonora Ferraris
摘要
Abstract Conductive and biocompatible (micro)structures have attracted considerable interest in bioelectronic systems, tissue engineering, and cell-instructive interfaces. However, the reliable fabrication of bioconductive microstructures with high resolution, excellent electrical performance, and good biocompatibility remains a current biofabrication challenge, which requires the synergistic advancement of functionalised materials and their related production process. In this study, Aerosol jet® printing (AJ®P) is proposed as a promising direct writing approach towards fabricating bioconductive microstructures. A systematic investigation was conducted on gold nanoparticles (AuNPs) conductive patterns, focusing on the effects of key AJ®P parameters, including nozzle diameter, carrier gas flow rate ( CG ), and focus ratio ( Rf ), on printed linewidth ( Lw ). CG was identified as the dominant factor governing Lw , with a strong coupling effect between CG and Rf . By optimising printing parameters, a minimum Lw of 16.3 ± 0.2 μ m was achieved with high reproducibility. Electrical characterisation revealed that increasing the number of printed layers significantly reduced resistance, reaching a minimum of 6.8 ± 0.4 Ω due to enhanced microstructural connectivity. The biocompatibility of AuNPs coatings was evaluated by culturing human Dental Pulp Stem cells differentiated Schwann cells (hDPSC-SCs) on the coating. The results demonstrated that hDPSC-SCs displayed good adhesion, proliferation and maintained their phenotype. On AJ®P-fabricated 100/160 μ m AuNPs micropatterns, the cell density on the AuNPs tracks was about 4 times higher than that on the adjacent glass regions, indicating a pronounced preferential adhesion of hDPSC-SCs to the conductive microtracks. Furthermore, on the 40/160 μ m AuNP micropatterns, up to 93% of hDPSC-SCs were aligned along the printing direction, demonstrating a strong contact-guidance effect. These results demonstrate that the AuNPs microtracks provided effective guidance, promoting both cell adhesion and alignment. Overall, this study demonstrates the feasibility of AJ®P for the high-resolution fabrication of bioconductive AuNP micropatterns. The findings provide a manufacturing foundation for the application of metal-based conductive microstructures in bioelectronic interfaces and cell-instructive culture systems, and offer valuable insights for the future development of more advanced neural tissue engineering platforms.