本构方程
地质学
岩土工程
材料科学
流变学
复合材料
变形(气象学)
混合理论
蠕动
矿物学
作者
Yang Gao,Shunbo Zhang,Zhongping Yang,Miao Liu,Deming Leng,Xinrong Liu
标识
DOI:10.1016/j.jrmge.2026.07.022
摘要
The essence of landslide movement is the nonlinear mechanical response of sliding materials under high-strain-rate loading. Rainfall intensifies both the occurrence and movement of landslides, introducing complexities in dynamic mechanical behavior that are absent under dry conditions. To improve the understanding and assessment of landslide movement processes, the Holmquist–Johnson–Cook (HJC) constitutive model was adopted to characterize the dynamic mechanical behavior of dry and saturated sandstone. The static and dynamic mechanical properties and deformability of dry and saturated sandstone were obtained through uniaxial compression, Brazilian splitting, triaxial compression, uniaxial cyclic loading–unloading compression, and split Hopkinson pressure bar (SHPB) tests. By combining laboratory tests, theoretical analysis, and numerical simulations, a method was proposed to determine the complete parameters of the HJC model for dry and saturated sandstone. Simulations of the uniaxial compression, triaxial compression, and SHPB tests were then conducted using the determined HJC model parameters. The simulated results showed excellent agreement with the testing results in terms of mechanical properties and deformability, and they characterized the post-peak behavior and failure modes well. In addition, the influence of 19 HJC model parameters on the dynamic mechanical behavior was evaluated through a one-factor sensitivity analysis. This study not only addresses the difficulty in parameter determination for numerical methods using the HJC model under dry and saturated conditions, but the determined HJC model parameters for dry and saturated sandstone can also provide a reference for simulating this material in a wide range of other scenarios, such as impact, explosion, and penetration.
科研通智能强力驱动
Strongly Powered by AbleSci AI