High Resolution Image Download MS PowerPoint Slide The hydrogenation of CO 2 is presented as a catalytic strategy for CO 2 utilization and an approach to the development of sustainable processes to obtain products with high added value, such as CO, CH 4, and CH 3 OH. An unsupported Ni x Ga y model catalyst with high surface area was synthesized by an ultrasonic-assisted coprecipitation method. The in situ H 2 -treatment and the activation temperature (600, 700, and 800 °C) are key in the phases present in the catalyst and, therefore, in the reactivity in the CO 2 hydrogenation reaction at atmospheric pressure. Operating conditions have been selected that maximize the selectivity to be able to correlate phases, surface, and reactivity. Independently of the H 2 /CO 2 feed ratio, after treatment in hydrogen at 600 °C, CO selectivity values are higher than 97%, via a reverse water gas shift reaction, with Ni 13 Ga 9 and Ni metallic being the main phases detected. The H 2 -treatment at 700 °C increases the proportion of Ni 0 and Ni 13 Ga 9 phases, and even with the use of a H 2 /CO 2 feeding ratio of 3, methanation is the only reaction that occurs. At 800 °C, Ni 5 Ga 3 is the main phase detected, and methanol is formed at 150 °C, through the intervention of a necessary formate species; when the reaction temperature is higher than 400 °C, the rWGS is the only observable reaction, with complete CO formation.