THERMOREVERSIBLE CROSS-LINKING OF RUBBER COMPOUNDS: FROM PROOF-OF-CONCEPT TOWARD AN INDUSTRIAL PROCESS

ABSTRACT It is demonstrated that the concept of thermoreversible cross-linking of functionalized maleic anhydride grafted ethylene–propylene (EPM-g-MA) rubber using Diels–Alder chemistry is limited neither to laboratory scale using a solvent route nor to gum rubber. The use of an internal mixer is the first step toward an industrial process, since it greatly reduces the processing time and allows for a solventless process for the furan-functionalization and subsequent bismaleimide cross-linking of EPM rubber. Practical rubber compounds were prepared by mixing thermoreversibly cross-linked EPM with carbon black and mineral oil in the same batch mixer. This resulted in reinforcement of the rubber without affecting the thermoreversible character of the cross-linking. The pendant furan groups of the (non)cross-linked EPM-g-furan interact with the carbon black filler. Finally, crystalline EPM rubber compounds were prepared, which show excellent material properties and property retention over multiple reprocessing cycles.