Carbon nanotube EUV pellicle tunability and performance in a scanner-like environment

Background: An extreme ultraviolet (EUV)-transparent pellicle must be used during lithography to protect the photomask from fall-on particles. A pellicle made of free-standing carbon nanotube (CNT) films stops particles despite the presence of gaps while demonstrating high EUV transmission, mechanical stability, low EUV scattering and reflectivity, and DUV transmission that enables through-pellicle mask inspection. Aim: The CNT EUV pellicle properties can be tailored based on the diversity of CNT structures and tunability of their configuration within the CNT film (density, bundle size, composition, etc.) as shown in this work. A remaining challenge is extending the CNT EUV pellicle lifetime in the scanner environment of EUV-induced hydrogen-based plasma, and the effects on different CNT films are explored here. Approach: Optical and thermal properties of different CNT pellicles with respect to the CNT material type, density, composition, and bundle size were explored. The ability of uncoated CNT EUV pellicles to withstand high EUV powers in the hydrogen-based environment was tested. Transmission, spectroscopic, and chemical mapping of the exposed CNT membranes were performed to explore the material modifications under various exposure conditions. Results: Uncoated CNT pellicles withstand 600-W source power equivalent in the EUV scanner-like gas environment but exhibit structural changes with prolonged exposure. Multiwalled CNT pellicles exhibit less EUV transmission change as compared to single-walled CNT pellicles under the same exposure conditions. The protection of CNT material from structural degradation by means of coating was shown. Conclusions: These investigations add to the understanding of CNT EUV pellicle tunability for optimal performance and lifetime limiters of CNT pellicles under the influence of EUV radiation and plasma. We anticipate the need for coating the CNT pellicle to protect the CNT material against plasma damage for the current scanner conditions. Optimization of both the CNT membrane and its coating is in progress.