聚乳酸
材料科学
挤压
极限抗拉强度
热塑性塑料
结晶度
延伸率
复合材料
热稳定性
淀粉
相容性(地球化学)
反应挤出
化学工程
聚合物
化学
有机化学
工程类
作者
Wenbo Qin,Yongkang Qiu,Huan He,Bin Guo,Panxin Li
标识
DOI:10.1016/j.ijbiomac.2024.133758
摘要
In this study, a one-step extrusion method is proposed to prepare blended polylactic acid (PLA)/thermoplastic starch (TPS) using a novel plant-derived compatibilizer, pyrogallic acid (PGA), to enhance the PLA/TPS compatibility. The effects of PGA on the mechanical behavior, fractured cross-section morphology, thermal and dynamic mechanical performance, and water resistance of PLA/TPS blends were systematically studied. Results demonstrate that the addition of PGA effectively improves the compatibility between TPS and PLA, resulting in enhanced tensile strength, crystallinity, elongation at break, thermal stability, and hydrophobicity of the blends. Specifically, incorporating 1.5 phr of PGA into the blend system yields the highest values for tensile strength (23.38 MPa) and elongation at break (16.96 %), which are 24.7 % and 233.2 %, respectively, higher than those observed for pure PLA/TPS blends. Furthermore, other properties exhibit obvious improvements upon incorporation of PGA into the blends. This approach provides a promising strategy for enhancing the performance of PLA/TPS blends and expanding their applications in food packaging, agricultural film, etc.
科研通智能强力驱动
Strongly Powered by AbleSci AI