转换器
电子工程
采样(信号处理)
调制(音乐)
计算机科学
控制器(灌溉)
数字控制
数字信号处理
信号边缘
三角积分调变
工程类
电压
模拟信号
电气工程
电信
美学
哲学
探测器
生物
CMOS芯片
农学
作者
Snehamoy Patra,Amit Kumar Singha
出处
期刊:IEEE Transactions on Circuits and Systems Ii-express Briefs
[Institute of Electrical and Electronics Engineers]
日期:2023-10-03
卷期号:71 (3): 1456-1460
被引量:8
标识
DOI:10.1109/tcsii.2023.3321890
摘要
Existing estimation-based approaches or predictive algorithm-based approaches use additional sensing circuits and complex calculations to implement digital average current mode control (ACMC). Uniformly sampled digital ACMC techniques either use dual-edge modulation or leading-edge modulation for sampling the average inductor current. However, they cannot be configured for trailing-edge modulation. This brief proposes a sampling mechanism to implement digital ACMC in a boost converter under trailing-edge modulation. The proposed sampling mechanism is simple and cost-effective as it does not need any additional sensing circuits or fast analog-to-digital converters (ADCs). Furthermore, the proposed mechanism is insensitive to system’s parasitics and parameter variations. The mechanism can be easily configured for leading-edge modulation. Discrete-time modeling technique is considered for small-signal modeling and controller design. The proposed sampling mechanism is implemented on an FPGA platform to control an in-house boost converter prototype. The proposed technique can be easily extended for other digital average current mode controlled converters.
科研通智能强力驱动
Strongly Powered by AbleSci AI