Shrinkage of Tape Cast Products During Binder Burnout

During sintering of tape cast products, anisotropic shrinkage occurs, which can be attributed to an anisotropic green tape structure concerning particle and pore orientation. Little is known about the shrinkage during binder burnout ( BBO ) and its relation to the microstructure of green tapes including the binder–plasticizer phase. Therefore, the article determines the shrinkage behavior of green tapes derived from alumina powders with different particle shape during binder burnout and prefiring in all spatial directions. The shrinkage after prefiring relative to the green and the debindered states is also discussed. The interrelation between shrinkage behavior and microstructure is investigated in dependence on different process parameters and specifically on the thermal behavior of the binder–plasticizer phase in the green tapes. It is shown that the subtraction of the BBO shrinkage from the total shrinkage results in completely different data for the sintering shrinkage anisotropy in z direction.