钙钛矿(结构)
材料科学
结晶度
光伏
能量转换效率
成核
纳米技术
粒度
晶界
光电子学
化学工程
光伏系统
钙钛矿太阳能电池
薄膜
平面的
科技与社会
晶体生长
作者
Yerim Kim,Hyunji Ryu,Won‐Suk Kim,Shafidah Shafian,Kyungkon Kim
出处
期刊:Small methods
[Wiley]
日期:2025-12-21
卷期号:10 (3): e01434-e01434
被引量:1
标识
DOI:10.1002/smtd.202501434
摘要
We demonstrate a "dry additive" strategy to enhance fully vacuum-deposited perovskite solar cells (PSCs) by co-evaporating diphenyl sulfoxide (DPSO) as a volatile solid additive during film formation. Vacuum-processed perovskite films often exhibit high nucleation densities and small grain sizes, which limit crystallinity and increase defects. Introducing DPSO-a Lewis base that temporarily binds perovskite precursors and slows their reaction, modulates nucleation, and enables the growth of much larger perovskite domains. DPSO-treated films show improved crystallinity, lower defect density, and enhanced charge-transport pathways due to reduced grain-boundary density. Power conversion efficiency (PCE) gains are modest for thicker films (peak ∼18.0% vs. ∼17.3% for control at 350 nm), but substantial in ultrathin devices, particularly at 200 nm, where high efficiency is maintained despite significant thickness reduction. PSCs with ∼200 nm active layers achieve PCEs around 17% with DPSO, compared to ∼3% without, and even a 150 nm DPSO-assisted film reaches over 11% efficiency. This capability to fabricate ultrathin (∼150-200 nm) layers with competitive efficiencies is important for developing lightweight and semitransparent solar cells. Notably, the DPSO-based approach also yields enhanced device stability-PSCs retain ∼94% of their initial efficiency after 720 h of ambient storage, far outperforming control devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI