高电子迁移率晶体管
光电子学
材料科学
合并(版本控制)
缩放比例
逻辑门
阈值电压
电压
蚀刻(微加工)
频道(广播)
宽禁带半导体
氮化镓
等效串联电阻
金属有机气相外延
蓝宝石
砷化镓
电子工程
栅极电压
电气工程
和大门
短通道效应
功率半导体器件
作者
Jiawei Cui,Yan Xu,Xingyu Fu,Zhenghao Chen,Sihang Liu,Hengyuan Qi,Han Yang,Junjie Yang,Maojun Wang,Xuelin Yang,Bo Shen,Jin Wei
摘要
This work demonstrates an E-mode regrown U-shaped p-GaN gate multi-channel HEMT on a sapphire substrate. The multi-channel access region is favorable to reducing the ON-resistance (RON). E-mode operation was achieved by locally etching through the multiple channels at the gate region and regrowing a p-GaN/AlGaN/GaN gate stack. The currents from multi-channel region merge into the gated channel through the regrown GaN layer. To study the effectiveness of the current merging mechanism, I–V characterization and transmission line method analysis have been conducted. The fabricated device with LGD of 52 μm presents a positive threshold voltage (VTH) of 1.8 V and a low RON of 21.6 Ω mm, corresponding to a specific resistance (RON,SP) of 13.82 mΩ cm2. The resistance of transition region where the multi-channel currents merge into the gated channel is found to account for 34% of the total RON. Temperature-dependent I–V characteristics of the device were investigated. At 150 °C, the percentage of the transition region resistance drops to 11%. The device presents competitive RON–LGD performance among the state-of-the-art GaN devices. These results validate the proposed U-shaped p-GaN gate multi-channel HEMT as a promising approach to reduce the RON of E-mode GaN power devices scaling up (i.e., with larger LGD) for wider operation voltage range.
科研通智能强力驱动
Strongly Powered by AbleSci AI