Electrocatalytic Reforming of Polylactic Acid Plastic Hydrolysate over Dynamically Formed γ-NiOOH

Upcycling plastic waste into valuable commodity chemicals with clean energy is an appealing strategy for mitigating environmental issues. Polylactic acid (PLA), a biodegradable plastic that is produced annually in millions of tons, can be chemically recycled to valuable products instead of being degraded to carbon dioxide. Here, we demonstrate an electrochemical reforming of PLA hydrolysate to acetate and acetonate using nickel phosphide nanosheets on nickel foam (Ni2P/NF) as the catalyst. The Ni2P/NF catalyst was synthesized by electrochemical deposition and phosphide treatment and showed excellent catalytic activity and ∼100% Faraday efficiency for electroreforming PLA to acetate and acetonate in an H-cell. Moreover, a stable performance of more than 90% Faraday efficiency for value-added organics was achieved for a duration of 100 h in a flow cell at a current density of 100 mA cm–2 and a potential below 1.5 V vs. RHE. In situ characterization revealed that the catalyst underwent electrochemical reforming during the reaction to produce γ-phase NiOOH with high electrochemical activity. This work introduces a new and green solution for the treatment of waste PLA, presenting a low-cost and highly efficient strategy for electrically reforming plastics.