水力旋流器
环境科学
沉淀
算术下溢
泥浆
分离器(采油)
沉积物
海洋工程
石油工程
环境工程
采矿工程
废物管理
工程类
地质学
计算机科学
古生物学
物理
经典力学
热力学
程序设计语言
作者
Steven A. Rizea,John Halkyard,Jim Wodehouse,Robert D. Blevins,Lori Johnston,James Adamson,Kamlesh Joshi
摘要
Abstract This paper describes concepts to minimize the plume generated by unwanted sediments collected along with manganese nodules during hydraulic mining operations. The concept consists of two novel technologies: separating all sediment from the collected nodule slurry to eliminate sediment from entering the riser and lift system, thereby reducing, or eliminating a midwater plume, and subsea electrocoagulation (EC) to create rapidly settling flocs of sediment being discharged from the seafloor collector. The first approach involves designing a gravity separator (hopper) whereby the larger particles fall through an outlet and are entrained with clean water before entering the riser, while all the sediment and water collected with the nodules exits at the hopper overflow. To prevent sediment from being entrained with the nodules, a "reverse hydrocyclone" and secondary hopper is incorporated in the underflow circuit to help maintain a positive pressure differential between the riser inlet and the hopper during operations. The second approach employs the marinization of proven wastewater treatment EC technology to create large metalliferous flocs which attract the sediment causing rapid settling when the slurry is discharged aft of the collector. Work reported here includes numerical (CFD) confirmation of the separator performance, and experimental demonstration of the EC application, as well as techno-economic assessments of the cost impacts of implementing these technologies. This work was supported by the U.S. Department of Energy, Advanced Research Projects Agency – Energy (ARPA-E), and with contributions of sediment for the EC tests by The Metals Company from the Clarion Clipperton Zone and Ocean Minerals, LLC from the Cook Islands EEZ.
科研通智能强力驱动
Strongly Powered by AbleSci AI