Effect of Abrasive Particle Size on Abrasive Wear Resistance in Otomotive Steels

If one of the surfaces which are in touch is rough and hard, it chips the other surface due to relative motion or touching forces. The wear is called two-body abrasive wear. If there are free abrasive particles between the two bodies, the wear is called three-body abrasive wear. The free abrasive particles may be external material dust or the remains of chipping. Usually, the wear starts as a two-body abrasive or adhesive wear and then becomes a threebody wear as dust form between the two surfaces due to external particles, chipping remains, or oxide particles. In three-body abrasive wear, wear rate increases as diameter of abrasive particles increases. Gouging, high stress abrasion and low stress abrasion are types of three-body abrasive wear [1-3].