Laboratory Testing of Kinetic Sand as a Reference Material for Physical Modelling of Cone Penetration Test with the Possibility of Artificial Neural Network Application

Cone Penetration Testing (CPT) is a quick survey in situ method through which soil parameters are not determined directly, but have to be estimated using derived relations between required soil parameter and soil resistance at the testing probe. Boundary conditions affect the reliability of the estimated soil parameters, therefore controlled laboratory conditions were applied to the intended CPT procedure analysis. Density, pycnometry, oedometer and direct shear tests of kinetic sand were performed to prove its usability as a reference testing material for further CPT laboratory analysis. The results of testing the kinetic sand are presented in this paper. Executed tests proved the kinetic sand as a reliable material in terms of the homogeneity and consistency of its physical and mechanical parameters. The material is utilizable as a substitution of cohesive sandy soils in physical modeling without the negative impact of the consistency-dependent behavior of fine-grained soils. However, some differences in parameters with respect to the natural soils should be taken into account. Neural network theory and numerical approach will be applied to the intended CPT laboratory analysis under controlled boundary conditions using kinetic sand to evaluate its potential for the determination of soil parameters.