Effects of pH and Catalyst Concentration on Photocatalytic Oxidation of Aqueous Ammonia and Nitrite in Titanium Dioxide Suspensions

Batch experiments were conducted to study the effects of titanium dioxide (TiO2) concentration and pH on the initial rates of photocatalytic oxidation of aqueous ammonium/ ammonia (NH4+/NH3) and nitrite (NO2-) in UV-illuminated TiO2 suspensions. While no simple kinetic model could fit the data at lower TiO2 concentrations, at TiO2 concentrations > or = 1 g/L, the experimental data were consistent with a model assuming consecutive first-order transformation of NH4+/NH3 to NO2- and NO2- to nitrate (NO3-). For TiO2 concentrations > or = 1 g/L, the rate constants for NO2 photocatalytic oxidation to NO3 were far more dependent on TiO2 concentration than were those for NH4+/NH3 oxidation to NO2-, suggesting that, without sufficient TiO2, complete oxidation of NH4+/NH3 to NO3- will not occur. Initial NH4+/NH3 photocatalytic oxidation rates were proportional to the initial concentrations of neutral NH3 and not total NH3(i.e., [NH4+] + [NH3]). Thus, the pH-dependent equilibrium between NH4+ and NH3, and not the pH-dependent electrostatic attraction between NH4+ and the TiO2 surface, is responsible for the increase in rates of NH4+/NH3 photocatalytic oxidation with increasing pH. Electrostatic adsorption, however, can partly explain the pH dependence of the initial rates of NO2- photocatalytic oxidation. Initial rates of NO2- photocatalytic oxidation were 1 order of magnitude higher for NO2- versus NH4+/NH3, indicating thatthe rate of NH4+/NH3 photocatalytic oxidation to NO3- was limited by NH4+/NH3 oxidation to NO2- under our experimental conditions.