二氧化碳
二氧化碳电化学还原
电化学
电极
扩散
气体扩散
还原(数学)
化学
材料科学
碳纤维
无机化学
化学工程
分析化学(期刊)
一氧化碳
环境化学
有机化学
催化作用
物理化学
热力学
复合材料
几何学
工程类
物理
复合数
数学
作者
Alex J. Welch,Aidan Q. Fenwick,Annette Böhme,Hsiang‐Yun Chen,Ian Sullivan,Xue–Qian Li,Joseph S. DuChene,Chengxiang Xiang,Harry A. Atwater
标识
DOI:10.1021/acs.jpcc.1c06265
摘要
The local pH near the surface of a CO 2 reduction electrocatalyst strongly impacts catalytic selectivity and activity. Here, confocal fluorescence microscopy was used to map the electrolyte pH near a copper gas diffusion electrode during CO 2 reduction with micron spatial resolution in three dimensions. We observed that the local pH increased from pH 6.8 to greater than pH 10 as the current density was increased from 0 to 28 mA/cm 2 in a 100 mM KHCO 3 electrolyte. Variations in the pH across the surface indicate areas of locally increased activity. Within deep trenches of the active layer, the local pH increases as trench width decreases. Computational models confirm these experimental results and also showed that the catalyst found within narrow trenches is more active than that found at the surface of the electrode. This study suggests that the overpotential required to perform selective CO 2 reduction can be reduced by increasing the density of narrow trench regions in the microporous layer.
科研通智能强力驱动
Strongly Powered by AbleSci AI