钻探
有限元法
联轴节(管道)
扭转振动
结构工程
压力(语言学)
振动
机械
锤子
扭矩
转速
声学
钻头
弯矩
材料科学
工程类
物理
机械工程
语言学
热力学
哲学
作者
Diego Scaccabarozzi,Bortolino Saggin
出处
期刊:Sensors
[Multidisciplinary Digital Publishing Institute]
日期:2021-05-25
卷期号:21 (11): 3677-3677
被引量:8
摘要
This work describes the results of a test campaign aimed to measure the propagation of longitudinal, torsional, and flexural stress waves on a drill bit during percussive rock drilling. Although the stress wave propagation during percussive drilling has been extensively modeled and studied in the literature, its experimental characterization is poorly documented and generally limited to the detection of the longitudinal stress waves. The activity was performed under continuous drilling while varying three parameters, the type of concrete, the operator feeding force, and the drilling hammer rotational speed. It was found that axial stress wave frequencies and spectral amplitudes depend on the investigated parameters. Moreover, a relevant coupling between axial and torsional vibrations was evidenced, while negligible contribution was found from the bending modes. A finite element model of the drill bit and percussive element was developed to simulate the impact and the coupling between axial and torsional vibrations. A strong correlation was found between computed and measured axial stress spectra, but additional studies are required to achieve a satisfactory agreement between the measured and the simulated torque vibrations.
科研通智能强力驱动
Strongly Powered by AbleSci AI