烧结
微观结构
材料科学
陶瓷
晶粒生长
粒度
立方氧化锆
晶界
过程(计算)
冶金
复合材料
计算机科学
操作系统
作者
E. Salernitano,Selene Grilli,Francesca Mazzanti,Paride Fabbri,Giuseppe Magnani
出处
期刊:Open ceramics
[Elsevier BV]
日期:2022-02-26
卷期号:9: 100242-100242
被引量:11
标识
DOI:10.1016/j.oceram.2022.100242
摘要
The two-step sintering (TSS) process is generally used to reduce the temperature conventionally required for the sintering of ceramics and to achieve a fine microstructure, but to date a general rule concerning the TSS parameters has not yet been identified. The TSS process was successfully applied to ZnO, Al2O3 and alumina-zirconia composites obtaining a comparable density to that achieved by the conventional process and with limited grain growth. A fine‐grained microstructure was maintained, avoiding the grain boundary migration, by the right selection of the operating conditions (essentially temperatures and holding time). A comparative study of the TSS on different advanced ceramic materials, such as SiC, ZnS and ZrO2, was also proposed, mainly based on the density, the microstructure and the grain size. Moreover, a general rule concerning the process temperatures with respect to the conventional sintering was defined to obtain the same densification preventing the grain growth.
科研通智能强力驱动
Strongly Powered by AbleSci AI