渗透
材料科学
海水淡化
膜
聚酰胺
相对湿度
反渗透
化学工程
水蒸气
肿胀 的
界面聚合
分析化学(期刊)
复合材料
色谱法
聚合物
有机化学
单体
化学
工程类
物理
热力学
生物化学
渗透
作者
Fabrizia Foglia,Santanu Karan,Manuela Nania,Zhiwei Jiang,Alexandra E. Porter,Robert David Barker,Andrew Guy Livingston,João T. Cabral
标识
DOI:10.1002/adfm.201701738
摘要
The structure and hydration of polyamide (PA) membranes are investigated with a combination of neutron and X‐ray reflectivity, and their performance is benchmarked in reverse osmosis water desalination. PA membranes are synthesized by the interfacial polymerization of m ‐phenylenediamine (MPD) and trimesoyl chloride (TMC), varying systematically reaction time, concentration, and stoichiometry, to yield large‐area exceptionally planar films of ≈10 nm thickness. Reflectivity is employed to precisely determine membrane thickness and roughness, as well as the (TMC/MPD) concentration profile, and response to hydration in the vapor phase. PA film thickness is found to increase linearly with reaction time, albeit with a nonzero intercept, and the composition cross‐sectional profile is found to be uniform, at the conditions investigated. Vapor hydration with H 2 O and D 2 O from 0 to 100% relative humidity results in considerable swelling (up to 20%), but also yields uniform cross‐sectional profiles. The resulting film thickness is found to be predominantly set by the MPD concentration, while TMC regulates water uptake. A favorable correlation is found between higher swelling and water uptake with permeance. The data provide quantitative insight into the film formation mechanisms and correlate reaction conditions, cross‐sectional nanostructure, and performance of the PA active layer in RO membranes for desalination.
科研通智能强力驱动
Strongly Powered by AbleSci AI