Sound absorptive light comprising nanofibrous resonant membrane applicable in room acoustics

Room acoustic solutions are based on measurements of the acoustic power of the room and acoustic elements with different functions (absorption tiles, absorption ceilings, absorption bodies, diffusers, barriers). This work is focused only on absorption elements with an emphasis on addressing lower-middle frequencies. The design of the material is based on broad band noise. Damping of lower frequencies is restricted to a certain extent by the final thickness of the acoustic material. Nanofibrous resonant membranes will be used in the design to achieve higher sound absorption at lower frequencies in comparison with commercially available materials. The principle of the acoustic system is to use combination of a perforated sheet covered by a nanofibrous resonant membrane, which is brought into forced vibration upon impact of sound waves of low frequency. Practical application:To absorb sounds of high frequencies, porous materials are used. To absorb sounds of low frequencies, resonant membranes are employed. However, these structures absorb only sounds of certain frequency. Nanofibrous layers have unique acoustic properties due to the large specific surface area of the nanofibres, where viscous losses may occur, and also the ability to resonate at its own frequency. The advantage of this technology is the space between the acoustic element with a thickness of 1–2 mm and the wall/ceiling, which can be used for the installation of lighting/audio speakers, etc. The acoustic light prototype has been made.