材料科学
单体
环氧树脂
再生(生物学)
复合材料
聚合物
废物管理
制浆造纸工业
聚合
接口(物质)
作者
Liu Yubing,Bin Du,Xianhua Huan,Y ZHAO,Yunjian Wu,Gao Chao,Jiahe Yu,Zhang Xiaoxing,Shaojun Xu
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2026-05-15
卷期号:: 3546-3551
标识
DOI:10.1109/cieec69682.2026.11572340
摘要
Epoxy-based insulation materials are widely used in high-voltage power equipment such as GIS spacers, cable terminations, and instrument transformers. At the end of life, their crosslinked structure poses environmental challenges. Recent advances in chemical degradation enable conversion of waste epoxy into reusable intermediates (polyols and diphilic salts), yet a scalable process bridging lab degradation and industrial monomer resynthesis remains unreported. This paper presents a 50-kg batch regeneration process simulated in Aspen Plus for co-producing epoxy monomer from polyols and phthalic anhydride from diphilic salts. A decoupled simulation framework handles the two streams independently, with each sub-process validated against experiment data (deviation98% purity with satisfactory yields. The process exhibits stable dynamic control and acceptable energy consumption, confirming technical feasibility for industrial piloting. An economic assessment of the polyol-to-epoxy monomer route confirms its cost competitiveness, providing a practical reference for industrial implementation.
科研通智能强力驱动
Strongly Powered by AbleSci AI