材料科学
灵活性(工程)
多孔性
桥接(联网)
化学工程
聚合物
纳米技术
高原(数学)
碳纤维
阳极
工作(物理)
分子工程
分子动力学
平面的
分子
自组装
化学物理
扩散
材料设计
表面工程
复合材料
作者
Ying Zhao,Chuang Qiu,Shengyong Gao,Yibo Zhu,Kuan Fang,Heping Niu,Peng Liu,Liting Yang,Yahui Chen,Hui Ying Yang,Lianzhou Wang,Bin Luo,Jisheng Zhou
摘要
ABSTRACT Closed pores are critical structural motifs that enable low‐voltage plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries, yet their controllable construction through precursor molecular design remains challenging. Herein, we demonstrate molecular bridging flexibility as an effective design principle for regulating closed‐pore formation in HCs. The flexibility/rigidity of polymer precursors is tailored by distinct bridging configurations, namely Ar─CH 2 ─Ar and Ar─O─C bridges, where oxygen‐containing bridges enhance segmental flexibility. During early‐stage pyrolysis, flexible precursor segments provide higher conformational freedom, inducing curved carbon skeletons and promoting the formation of semi‐open sub‐1 nm pores. Driven by high surface energy, these semi‐open pores undergo pore‐mouth closure during high‐temperature pyrolysis, generating abundant closed pores. The resulting HC exhibits a closed porosity of 0.12 cm 3 g −1 and a pore size 1.13 nm, which enhances plateau capacity and sodium‐ion diffusion kinetics. Consequently, the flexible‐precursor‐derived HC delivers a high reversible capacity of 356.1 mAh g −1 and a plateau capacity of 242.7 mAh g −1 . Moreover, a practical 1.2 Ah pouch cell achieves 217.2 Wh kg −1 and retains 81.2% of its initial capacity after 100 cycles at 0.5 C. This work establishes a molecular‐level strategy for closed‐pore engineering in HC anodes for high‐performance sodium‐ion batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI