沥青
粘弹性
热电偶
材料科学
热的
结构工程
极限抗拉强度
工作(物理)
传热
变形(气象学)
环境科学
拉伸应变
沥青混凝土
车辙
功率(物理)
断裂(地质)
航程(航空)
复合材料
温度测量
岩土工程
汽车工程
有限元法
材料性能
动载荷
压力(语言学)
沥青路面
温度计
发热
作者
Pedram Balooch Sirgani,Sebastian Morales,Rajib Basu Mallick,Cesar Tirado,Soheil Nazarian
标识
DOI:10.1061/jpeodx.pveng-2144
摘要
Abstract Wireless power transfer (WPT) has emerged as a viable solution to overcome key limitations in electric vehicle adoption, notably range anxiety and the constraints of plug-in charging. The integration of WPT systems into asphalt pavements requires overcoming challenges related to heat accumulation from electromagnetic losses and the viscoelastic nature of asphalt materials. This study presents an experimental work to simulate and evaluate the coupled thermal and mechanical behavior of asphalt pavements embedded with WPT components. Simulated thermal loading was applied using temperature-controlled heating pads, with temperature distribution monitored via embedded thermocouples and infrared imaging. Structural responses under dynamic loading were assessed using a Model Mobile Load Simulator 3, while strain in the asphalt layer was captured through distributed fiber optic sensing. An investigation of wheel wander effects was also carried out. Results show that a 10°C surface temperature increase raised maximum tensile strain by 35% to 90%, depending on the loading duration, and that lateral wheel wander can change peak tensile strains by up to one-third, highlighting the strong influence of thermal gradients and load positioning on pavement response. These findings provide important insight into the interaction between thermal effects and mechanical performance, supporting the design of durable and efficient electrified pavement systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI