电解质
材料科学
阴极
离子电导率
电化学
化学工程
锂(药物)
相间
氯化物
快离子导体
复合数
电导率
无定形固体
离子键合
氧化物
卤化物
无机化学
离子液体
导电体
纳米技术
氯化锂
电极
储能
阳极
电化学窗口
能量密度
作者
Huan Hu,Zhixuan Yu,Long Xie,Tengxiao Mu,Zhaoyu Rong,Zhihao Yan,Jiangtao Wang,XuanYu Lou,Xuedong Zhang,Xue Li,Ke Huang,Wenrui Sun,Xi He,Yongli Huang,Liwen Yang,Yongfu Tang,Jianyu Huang,Guobao Xu
出处
期刊:ACS Nano
[American Chemical Society]
日期:2026-11-13
标识
DOI:10.1021/acsnano.6c15117
摘要
Abstract Halide solid electrolytes offer a compelling combination of wide electrochemical stability and high safety for all-solid-state lithium batteries (ASSLBs), yet their practical application is severely hindered by interfacial degradation, mechanical contact loss, and low active-material utilization when paired with Ni-rich layered oxide cathodes. Here we synthesize a monoclinic Li2.4Yb0.4Zr0.6Cl6 (LYZC) with a high ionic conductivity of 2.1 × 10–3 S·cm–1 at 30 °C, and then coat it with an ultrathin amorphous organic interphase (LYZC@CH) through an organic-solvent-assisted low-temperature strategy. The adaptive organic interphase transforms the intrinsically rigid chloride electrolyte into a chemo-mechanically compliant ion conductor that accommodates cathode volume variation while preserving rapid lithium–ion transport. Consequently, the engineered electrolyte stabilizes the cathode/electrolyte interface, suppresses parasitic interfacial reactions and structural degradation, and enables composite cathodes with a high active-material content of 90%. The resulting LiNi0.83Co0.12Mn0.05O2 composite cathode delivers an electrode-level energy density of 402.22 Wh kg–1 and retains nearly 100% of its capacity after 2000 cycles at 5 C in 30 MPa. This work establishes an electrolyte-centered interfacial engineering strategy for practical high-energy all-solid-state lithium batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI