Exploring the limits of Fe content in Al-Co-Cr-Fe-Ni-based eutectic high entropy alloys using CALPHAD-based alloy design

Using AlCoCrFeNi2.1 alloy as the reference composition, a novel NiaAlb(FeCoCr)c eutectic high entropy alloy (EHEA) system is proposed. A strong linear relationship was established between the elemental combinations of Ni, Al and (Fe+Co+Cr)-content that evolves a similar volume fraction of B2 phase to the as-cast reference composition (volume fraction of B2 phase ~34%) using CALPHAD. For a fixed elemental combination of Ni and Al using the proposed criteria, the equi-atomic substitution of Co and Cr with Fe in the defined (Fe+Co+Cr)-content yields a similar as-cast phase structure to the reference composition (near the melting point such as 1300 ͦ C). From this large pool of alloy compositions, a few alloys with different elemental combinations (Fe-contents from 16.4 to 55 at.%) were identified and prepared by arc melting. The as-cast EHEAs exhibited a similar lamellar microstructure and tensile properties (yield strength ~570 MPa and ultimate strength of ~1000 MPa) as the AlCoCrFeNi2.1 reference composition. It is thereby demonstrated that in alloys based on microstructure-driven mechanical performance, it is possible to substitute costly elements in EHEAs for lower cost Fe.