动力学
相(物质)
丙烯酸酯
分离(统计)
刚度
材料科学
化学
复合材料
数学
物理
聚合物
有机化学
统计
共聚物
量子力学
作者
Kanta Das Purkaysta,Lauren Zakrzewski,Catalin Radu Picu
标识
DOI:10.1021/acsapm.5c01183
摘要
The objective of this work is to evaluate the effect of network stiffness on the development of microstructure through phase separation during photopolymerization (photo-PIPS). We control the room temperature network stiffness by adjusting the molar fraction of the three components of the network: tricyclo [5.2.1.0 2,6 ] decanedimethanol diacrylate (TCDDA), poly(ethylene glycol) diacrylate (PEGDA), and isobornyl acrylate (IBoA). The phase separating additive is polypropylene glycol (PPG) with M n = 4000 and 425 g/mol in separate trials. The long chain additive phase separates more efficiently and forms well-defined microscale subdomains. Increasing the stiffness of the network favors the formation of smaller subdomains and decreases slightly the acrylate conversion. However, conversion is larger relative to the neat resin in all additive-containing materials. The low molecular weight additive forms, in part, nanoscale subdomains, while the rest is trapped in the network, which leads to a drastic reduction of the glass transition temperature and flow stress relative to the neat resin. The strength is lower in all materials containing PPG relative to the neat resin, the effect being more pronounced when short chain additives are used. The drop of strength of materials with PPG additive relative to the neat resin decreases as the network stiffness increases. These results contribute to the development of methods for the control of the microstructure emerging during photo-PIPS.
科研通智能强力驱动
Strongly Powered by AbleSci AI