Study of Automatic Gain Control System in Broadband Radio Receiver

In modern times, almost all communication systems are digital. In the receivers of such communication systems, the analog signal is discretized and quantized using an analog-to-digital converter at an intermediate frequency. Automatic gain control is used to avoid overloading the analog-to-digital converter and to maintain intermediate frequency analog signals at a suitable fixed level. If the power of the received signals is much less than the load level of the analog-to-digital converter, the automatic gain adjustment increases the gain, reducing the quantization noise. If the received signal strength is high, the automatic gain adjustment lowers the gain so that the analog-to-digital converter is not overloaded. The accuracy of the adjustment of the transmission coefficient of the automatic adjustment of the digital amplification does not always satisfy the requirements given in real time. Based on the above, the article is devoted to the study of the digital automatic gain regulator of the broadband radio receiver.