材料科学
卤化物
二极管
光电子学
白光
金属
化学工程
冶金
化学
无机化学
工程类
作者
Xuan Meng,Sujun Ji,Qiujie Wang,Xiaochen Wang,Tianxin Bai,Ruiling Zhang,Bin Yang,Yimeng Li,Zhipeng Shao,Junke Jiang,Keli Han,Feng Liu
标识
DOI:10.1002/advs.202203596
摘要
Abstract Single‐component emitters with stable and bright warm white‐light emission are highly desirable for high‐efficacy warm white light‐emitting diodes (warm‐WLEDs), however, materials with such luminescence properties are extremely rare. Lowdimensional lead (Pb) halide perovskites can achieve warm white photoluminescence (PL), yet they suffer from low stability and PL quantum yield (PLQY). While Pb‐free air‐stable perovskites such as Cs 2 AgInCl 6 emit desirable warm white light, sophisticated doping strategies are typically required to increase their PL intensity. Moreover, the use of rare metal‐bearing compounds along with the typically required vacuum‐based thin‐film processing may greatly increase their production cost. Herein, organic–inorganic hybrid cuprous (Cu + )‐based metal halide MA 2 CuCl 3 (MA = CH 3 NH 3 + ) that meets the requirements of i) nontoxicity, ii) high PLQY, and iii) dopant‐free is presented. Both single crystals and thin films of MA 2 CuCl 3 can be facilely prepared by a low‐cost solution method, which demonstrate bright warm white‐light emission with intrinsically high PLQYs of 90–97%. Prototype electroluminescence devices and down‐conversion LEDs are fabricated with MA 2 CuCl 3 thin films and single crystals, respectively, which show bright luminescence with decent efficiencies and operational stability. These findings suggest that MA 2 CuCl 3 has a great potential for the single‐component indoor lighting and display applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI