Application of hydro-abrasive erosion model from IEC 62364:2019 standard in Francis turbines

水力发电 混流式水轮机 涡轮机 磨损(机械) 水力发电 磨料 腐蚀 海洋工程 环境科学 水轮机 水轮机 入口 水文学(农业) 岩土工程 地质学 工程类 机械工程 电气工程 古生物学
作者
Nirmal Acharya,Saroj Gautam,Sailesh Chitrakar,Chirag Trivedi,Ole Gunnar Dahlhaug
出处
期刊:IOP conference series [IOP Publishing]
卷期号:1079 (1): 012008-012008 被引量:3
标识
DOI:10.1088/1755-1315/1079/1/012008
摘要

Hydro-abrasive erosion in hydraulic turbines is critical and one of the prominent issue due to its association with maintenance costs and production losses in the hydropower plant. IEC 62364:2019* standard guide focuses mainly on hydroelectric powerplant equipment and provides the standard on particle abrasion rates on several combinations like operating conditions, component materials properties, water quality among many factors. With the consideration of different critical parameters, a theoretical model of abrasion rate on hydraulic turbines is proposed by IEC 62364:2019. Present study is conducted to elucidate the several terms used in the theoretical model of abrasion rate for Francis turbine as per the guidelines. The work has taken account into run-off river (RoR) hydropower plant consisting of Francis runner operating in sediment laden rivers in the Himalayan area. Theoretical expected erosion depth for runner inlet, runner outlet, guide vanes facing plates and labyrinth seals is calculated. Characteristic velocities of runner (Wrun) and guide vanes (Wgv) were estimated to be 32.26 m/s and 35.05 m/s respectively. Particle load was calculated based upon the sampling data available from the site. Measurement data from field observation during overhauling was used for comparison with the data calculated from empirical relation. For 229 hours operation of turbine, observed abrasion depth varies from 8.1 mm in guide vanes to 1.5 mm in labyrinth ring corresponding to calculated values of 7.53 mm and 1.89 mm for same components. Results shows good correlation among calculated values from IEC and measured values from the site. An optimized solution can thus be devised based on the evaluation of hydro-abrasive erosion along with energy production and maintenance expenses. *IEC 62364:2019. Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines. Edition 2.0 (March 2019) International Electrotechnical Commission, Geneva, Switzerland [1]
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
刚刚
Bonnienuit完成签到 ,获得积分10
刚刚
abab小王完成签到,获得积分10
1秒前
kuaikuai完成签到,获得积分10
2秒前
小颖完成签到,获得积分10
3秒前
5秒前
Anxia发布了新的文献求助10
5秒前
李健的应助被Jeff采纳,获得50
7秒前
精忠报国完成签到,获得积分10
7秒前
科研通AI6.3的应助被Jeff采纳,获得10
7秒前
搜集达人的应助被Jeff采纳,获得10
7秒前
dbyte完成签到,获得积分10
7秒前
科研通AI6.3的应助被Jeff采纳,获得10
7秒前
7秒前
科研通AI65的应助被Jeff采纳,获得10
7秒前
乐乐的应助被Jeff采纳,获得10
8秒前
科研通AI65的应助被Jeff采纳,获得10
8秒前
科研通AI6.3的应助被Jeff采纳,获得10
8秒前
科研通AI6.3的应助被Jeff采纳,获得10
8秒前
科研通AI6.2的应助被Jeff采纳,获得10
8秒前
安紊完成签到,获得积分10
9秒前
amiee发布了新的文献求助10
10秒前
ww完成签到,获得积分10
10秒前
Anxia完成签到,获得积分10
12秒前
ggdh完成签到,获得积分10
13秒前
浮沉完成签到,获得积分10
13秒前
qqwoaini关注了科研通微信公众号
15秒前
Seotter完成签到,获得积分10
15秒前
AxiE完成签到 ,获得积分10
19秒前
受伤雨南完成签到,获得积分10
19秒前
占那个完成签到 ,获得积分10
23秒前
NN的应助被ibigbird采纳,获得10
25秒前
25秒前
27秒前
27秒前
30秒前
医无止境完成签到,获得积分10
30秒前
abb完成签到 ,获得积分10
31秒前
yunt完成签到 ,获得积分0
31秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Sex, Aging, and Death in a Medieval Medical Compendium: Trinity College Cambridge MS R.14.52, Its Texts, Language, and Scribe 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
基于界面调控的高效湿气发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8190389
求助须知:如何正确求助?哪些是违规求助? 9577518
关于积分的说明 21853016
捐赠科研通 7789293
什么是DOI,文献DOI怎么找? 3436376
关于科研通互助平台的介绍 2560210
邀请新用户注册赠送积分活动 2483032