材料科学
中子衍射
残余应力
脆性
有限元法
相(物质)
复合材料
压缩(物理)
压力(语言学)
极限抗拉强度
可塑性
衍射
切片
结构工程
机械工程
工程类
光学
物理
哲学
量子力学
语言学
作者
L. Degeneve,D. Mari,Pedro Vinícius Sousa Machado,E. Jiménez‐Piqué
标识
DOI:10.1016/j.ijrmhm.2022.106083
摘要
A Finite Element Model is developed to represent the mechanical behavior of WC-10 wt.% Co in compression tests. In this research, realistic three-dimensional model is obtained by slicing a sample by Focused Ion Beam and reconstituting it, resulting in two interpenetrated phases. The brittle WC phase is defined as elastic. The Co phase includes plasticity. The post sintering cooling is simulated, followed by a loading–unloading compression cycle. The results are then compared with experimental data obtained by neutron diffraction. The residual thermal stresses in both phases are in good agreement with the data obtained by neutron diffraction, featuring high tensile stress in the Co phase and moderate compressive stress in the WC phase. The elastic strain in the Co phase shows a good agreement in the loading cycle, but presents some differences in the unloading cycle. The plastic model applied to the Co phase is then modified to improve the accuracy of the simulation, showing a final good agreement with the experiment.
科研通智能强力驱动
Strongly Powered by AbleSci AI