Facile modification of polyvinylidene fluoride membrane for enhancing dialysis performance: sulfonation, adding polyethylene glycol and tuning coagulation bath temperature

Modifications were successfully carried out on the polyvinylidene fluoride (PVDF) flat sheet membrane, involving the sulfonation and adding polyethylene glycol (PEG), along with variations in the coagulation bath temperature (CBT). The primary objective of these modifications was to examine their impact on the physicochemical characteristics of the membrane and its permeability to a creatinine solution. The findings revealed that the sulfonated PVDF/PEG membrane, printed at a temperature of 30 °C, displayed substantial increases in porosity, hydrophilicity, water uptake and swelling degree. It is important to note that modifications to the PVDF membrane led to a reduction in thermal stability and an increase in creatinine transport efficiency. For the unmodified PVDF membranes, the clearance values for creatinine in phosphate buffer and phosphate buffer saline media were 0.43 (Transport = 28.65%) and 0.42 mg/dL (Transport = 28.05%), respectively. Conversely, the highest creatinine clearance values were achieved by the SPP30 membrane (sulfonated PVDF/PEG-CBT 30 °C), measuring 0.64 mg/dL (Transport = 42.81%) for creatinine and 0.60 mg/dL for urea (Transport = 39.66%). These results indicate that the sulfonated PVDF/PEG membrane exhibits strong potential for use in hemodialysis applications.