材料科学
成核
合金
结晶学
降水
透射电子显微镜
小角X射线散射
位错
散射
动力学
晶界
冶金
微观结构
复合材料
热力学
纳米技术
化学
光学
物理
气象学
量子力学
作者
Linyan Zhang,Hongyun Luo,Yuhao Jiang
标识
DOI:10.1016/j.jmrt.2023.11.277
摘要
The precipitation kinetics of precipitates with different orientations and segregation in an ultrafine grained (UFG) Al–Cu–Mg alloy (AA2024) aged at 210 °C have been investigated using situ small angle X-ray scattering (SAXS), situ wide angle X-ray (WAXS) and Transmission Electron Microscopy (TEM). For UFG alloy, the number and size of (111) S'/S phases are larger than those of (130) S'/S phases on the whole, because spacing of slip plane near (111) S'/S phases is larger than that near (130) S'/S phases, resulting in solute atoms are easier to diffusion near (111) S'/S phases, and (111) S'/S phases are easier to grow, meanwhile, resulting in the critical shear stress for dislocation moving near (111) S'/S phases is smaller than that near (130) S'/S phases, further leading to the dislocation density near (111) S'/S phases is 1.07–1.19 times larger compared to that near (130) S'/S phases during ageing process, which provides more nucleation sites for (111) S'/S phases. After ageing for 10–40 min, the segregation degree of Cu and Mg atoms near dislocations and grain boundaries is increased in UFG alloy, while after ageing for 80 min, the segregation of Cu atoms is decreased and Mg atoms continue to increase, the segregation of Mg atoms begin to decrease after ageing for 120 min.
科研通智能强力驱动
Strongly Powered by AbleSci AI