材料科学
复合材料
复合数
应变硬化指数
硬化(计算)
热塑性复合材料
再结晶(地质)
焊接
拉伤
变形(气象学)
挤压
加工硬化
作者
Ming Li,ShengXiong Tang,LiYang Xing,Soya Nishimoto,Michiaki Yamasaki
标识
DOI:10.1016/j.jmst.2026.09.097
摘要
A multilayer Mg-Al-Zn/Mg-Zn-Y composite material was fabricated for the first time via a vacuum gravity casting process combined with subsequent hot extrusion. Comprehensive microstructural characterization was conducted to systematically elucidate the microstructure evolution, texture transition, dynamic recrystallization (DRX) behavior, and deformation mechanisms of the composite. The results show that this processing strategy forms an interface with good metallurgical bonding and serrated mechanical interlocking characteristics, ensuring structural integrity and effective load transfer. Interrupted extrusion experiments revealed significant layer-dependent DRX. The premature deformation and DRX of the softer Mg-Al-Zn layer led to the formation of coarse DRXed grains in the extruded Mg-Al-Zn layer, while the harder Mg-Zn-Y layer exhibited delayed and restricted DRX due to rare earth element addition, forming a bimodal grain microstructure. The temporal and spatial asymmetry in DRX kinetics results in a multimodal laminated microstructure. During room-temperature tensile deformation, a significant strain partitioning occurred between the soft and hard layers. Plastic strain was initially accommodated by the Mg-Al-Zn layer and gradually transferred to the Mg-Zn-Y layer, thus enabling coordinated deformation at higher strain levels. Simultaneously, the continuous accumulation of dislocations near the heterogeneous interface activates heterogeneous deformation-induced (HDI) strengthening. The interlayer strain partitioning and dislocation accumulation at the heterointerface cause the composite material's work hardening capacity to exceed the predictions of the rule of mixtures.
科研通智能强力驱动
Strongly Powered by AbleSci AI