材料科学
相变
热能储存
聚合物
热的
温度控制
化学工程
相变材料
相(物质)
共晶体系
潜热
液晶
复合材料
环境科学
热力学
机械工程
化学
工程物理
工程类
物理
有机化学
作者
Qinrong Sun,Haiquan Zhang,Jiajia Xue,Xiaoping Yu,Yanping Yuan,Xiaoling Cao
标识
DOI:10.1016/j.cej.2018.07.185
摘要
Abstract Flexible phase-change materials (PCMs) have great potential applicability in thermal energy storage and temperature control. A binary composite mixture comprising polyethylene glycols of solid and liquid phases (PEG2000 and PEG400, respectively) was synthesized as a PCM base material. The PEG400 liquid phase was uniformly dispersed in the PEG2000 phase-change crystal on a molecular scale, thus creating many micro- and nanocrystals of PEG2000 via polycrystalline growth from a single crystal. To retain solidity and flexibility in the composite’s melted state, hydrogel technology and low-temperature drying were applied. We prepared flexible polymer gel shaped PCMs by adding sodium stearate (NaR) to the binary fused mixture. Needle-shaped NaR crystal grains of several hundred nanometers formed three-dimensional network structures, binding the binary flexible PCM within the network structure to form a polymer gel. These geometric structures not only achieve the solid–liquid PCM structure but also maintain flexibility in both the melted and solidified states (20–80 °C). The latent heats of melting and solidification for the polymer gel were 109.7 and 107.2 J/g, accounting for 87.5% and 85.8% of the PP20 binary eutectic, respectively. The demonstrated use of polymer gels provides a new route for investigating PCMs for heat storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI