Tuning of optoelectronic performance of SrTiO3 by surface termination and thickness

The outstanding optical and electrical properties make ternary oxides highly suitable for advanced optoelectronic applications comparing to the traditional silicon-based materials and heterostructures. SrTiO3 (STO), a pivotal perovskite oxide with a direct energy band gap of 3.2 eV, exhibits significant promise in ultraviolet (UV) photodetection. However, the photovoltaic performance of homoepitaxial STO has long been neglected. In this study, we investigated the optoelectronic characteristics of STO by manipulating the crucial factors of surface termination and thickness using oxide molecular beam epitaxy (oxide MBE). We achieved an exceptional charge carrier mobility of 56.5975 cm2 V-1s−1, along with an impressive ON/OFF ratio of 6000 % and a specific detectivity (D*) of 2.95 × 109 Jones (cm Hz1/2 W−1) under near-UV irradiation at room temperature. We observed a thickness-dependent semiconductor-to-metal transition with a critical thickness of 3.5 u.c. STO. The metallic STO displayed an extremely high mobility exceeding 105 cm2 V−1 s−1, accompanied by a substantial MR value exceeding 1000 % at 3 K. Furthermore, the thickness-dependent Hall effect and photoluminescence (PL) indicated that oxygen defects may govern the semiconducting/metallic behavior of STO. This study illustrates the optoelectrical capabilities of homoepitaxial STO, paving the way for advanced and high-performance photodetection in intricate optical materials and devices through homoepitaxy.