往复运动
润滑
材料科学
泄漏(经济)
机械
雷诺方程
瞬态(计算机编程)
印章(徽章)
流体轴承
复合材料
机械工程
工程类
雷诺数
计算机科学
经济
视觉艺术
艺术
宏观经济学
湍流
气体压缩机
物理
操作系统
作者
Jian Wei,XiaoYue Sun,Jing Tian,CaiHong Liu
标识
DOI:10.1108/ilt-06-2023-0166
摘要
Purpose This paper aims to study the impact of transient velocity changes on sealing performance during reciprocating sealing processes. Design/methodology/approach Establish a model of transient mixed lubrication, solve the transient Reynolds equation, consider the effect of temperature rise at the seal interfaces, and determine the behavior of the seal interfaces, such as film thickness and fluid pressure. Evaluation with friction and leakage rate, calculate the variation of sealing performance with reciprocating velocity under different working conditions, and verify it through bench experiments. Findings Within a reciprocating stroke, the frictional force decreases with increasing velocity, and the frictional force of the outstroke is greater than that of the instroke; at the time of the stroke transition, the fluid pressure is smallest and the rough peak contact pressure is greatest. At present, the dynamic pressure effect of fluids is the largest, and the friction force also increases, which increases the risk of material wear and failure. Friction and leakage increase with increasing pressure and root mean square roughness. As temperature increases, friction increases and leakage decreases. In studying the performance variations of seal components through a reciprocating sealing experiment, it was found that the friction force decreases with increasing velocity, which is consistent with the calculated results and more similar to the calculated results considering the temperature rise. Originality/value This study provides a reference for the study of transient sealing performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI